LED Strip 2000Ref. No.: 801018096 | Match code: LED-S 2000
- self-adhering LED-strips
- 2 m long
- Operating voltage 12 VDC
- two-sided connection cable (2 m)
- extendible as desired in 5 cm steps
Dimensions (LxWxH)2.000 mm x 10 mm x 2,5 mm
The LED strip with a length of 2 metres can be mounted on the vehicle without drilling thanks to its self-adhesive rear side. With its colour temperature in daylight white (5700 K) and the approx. 60 LEDs per linear meter which produce a lighting current of 390 lm/m, you are guaranteed constant illumination of the vehicle interior. This ensures that, even in the dark winter months, you have the optimal overview of the contents of your vehicle, right down to every last inch and corner.
The LED strip is extremely compact and can be practically mounted on the cross member of the vehicle without reducing the available interior height. And it is also possible to mount it on the van racking system, for example, to light individual shelves. The attachment process is very simple: Degrease the relevant surface, let it dry, remove the protective foil from the adhesive surface and press the strip on to the desired surface.
The LED strip has a connection cable on both sides at a length of 2 metres, whereby it is possible to cut the strip with scissors (cutting points every 5 cm) to operate a two-part strip.
The strip is only permissible with a suitable back-up fuse on the vehicle electrical system.(Pictures are similar, decorative material not included)
|IP degree of protection||62|
|Voltage in Volt||12|
|Inside dimensions (LxWxH)||x x mm|
|Dimensions (LxWxH)||2.000 mm x 10 mm x 2,5 mm|