Intermediate floor metal case KM 330 / 340 1/1 (63 mm)Ref. No.: 5232823 | Match code: BES 62 1/1
- Removable intermediate floor
- Organisation on two levels
- covers completely the interior surface of the case
- for equipping with inset boxes in height 63 mm
- suitable for metal case KM 330 and KM 340
Measurements (LxWxH)317 x 420 x 65 mm
The intermediate floor provides for even more order and the maximum exploitation of the case volume. It enables the sub-division of the case into two levels which can both be equipped with inset boxes.
This intermediate floor is suitable for the KM 330 and KM 340 metal cases and covers completely the interior surface of the case. It provides the perfect base for equipping with inset boxes height 63 mm (A3 Red, B3 Yellow, C3 Blue, D3 Green, F3 Orange, G3 Dark green). In the lower segment of the metal case KM 330 inset boxes height 31 mm (A3 Red, B3 Yellow, C3 Blue, D3 Green, F3 Orange, G3 Dark green) can be accommodated whereas with the KM 340 metal case these inset boxes are height 63mm. The inset boxes serve simultaneously as an support area for the intermediate floor. The removal of the intermediate floor as well as individual inset boxes from the case is possible at any time so that you can have these directly to hand on-site.
The pictured inset boxes are not contained in the scope of delivery.
The layout of the inset boxes can be rearranged as required, it is also possible to remove individual inset boxes. The inset boxes also enable you to keep an eye on your current stock of small components and consumables, letting you react in good time to shortages and avoiding downtimes.
The small components case is winning over fans as a reliable and practical organiser. Full loads and heavy equipment present no restrictions when it comes to the case’s functionality. Practical one-hand operation with a 120 degree stop bracket on the cover and its flexible organisation deliver a high level in work convenience. The ergonomically shaped handle on the front makes the small components case very comfortable to handle and easy to carry. The foam lid insert, included as standard, seals the top of the inset boxes, preventing the contents from becoming mixed up.
The small components case can be easily integrated into the Sortimo van racking system and WorkMo modules.(pictures are similar, decorative material not included; delivery only within Germany)
|Maximum capacity in kg||12|
|Measurements (LxWxH)||317 x 420 x 65 mm|
|Tiefe in mm||355 (depth 4)|
Small components case KM 330
Small components case KM 340