LED-warning beacon yellow 10-30 V magnetic baseRef. No.: 6000002371 | Match code: LED KL G MAG
- Magnetic foot with spiral cable
- connection to cigarette lighter
- no drilling necessary in the vehicle
- Registration complying with ECE R65 & ECE R10-04
- Operating voltage 10-30 VDC
Dimensions (LxWxH)185 mm x 185 mm x 160 mm
This LED beacon is equipped with a magnetic base allowing it to be positioned as needed on the vehicle’s roof. You can connect the light via the spiral cable with plug to the on-board socket/cigarette lighter (SAE J563) without the need for further cabling.
The light can be operated with an operating voltage of 10-30 VDC. It also conforms to ECE R65 E04 006598 as well as ECE R10-04 and is extremely long-lasting thanks to the use of LED technology.
The yellow flashing light is used to warn about hazards (see § 38 StVO).
The light emits 120 double flashes per minute. It is ideal for operation outdoors, thanks to its IP67 protection class and temperature range of -40 to +70 °C.
The height is 152 mm and the diameter is 183 mm.
Refer also to §52 StVZO (Road traffic regulations) when operating beacons in public traffic.
Note: The LED light is only intended for temporary use. It can only be positioned on flat, horizontal and normally painted surfaces on the (steel) vehicle roof. The recommended maximum speed with lights is 110 km/h.(Pictures are similar, decorative material not included)
|Dimensions (LxWxH)||185 mm x 185 mm x 160 mm|
|IP degree of protection||67|
|Voltage in Volt||